overclocked

Finally finished the top mounted swiftech AIO, got more pics and more work to do...
by Sparktite

Dipped some under layer parts, reglossified the phanteks panels and ssd mount, gotta re dip the front ports cover and repair the base panel corners
by Sparktite

Finally loading everything into the case now that the fan on top aren't catching anymore... Here's some quick uv color examples still testing out the ram color combos, then a shot of the back cable arrangement and a shot of the PCI-E riser I'm using for m
by Sparktite

And it's finally up and running perfectly.
by Sparktite

Extreme Overclocking - Gigabyte at the Rectron Roadshow August 2009
by Axel Bührmann

Finally sanded down what a pain I wanna skip wet sanding/polishing and just try primer then rdy then plasti dip all over, besides the shelf is gonna be covered on both sides so whose gonna see right? Lol I hate doing macro-spec shit
by Sparktite

Actually tearing it all down and planning to get as much of the move as I can under way I didn't really plan out how I was gonna maintain my main loop so I can't really even drain the thing without having to almost open the whole thing up to get to the ra
by Sparktite

Finally sanded down what a pain I wanna skip wet sanding/polishing and just try primer then rdy then plasti dip all over, besides the shelf is gonna be covered on both sides so whose gonna see right? Lol I hate doing macro-spec shit
by Sparktite

Think I stripped the screw or a part on the swiftechs pump mounting piece and it's causing a leak, luckily i already had plans to use that pump elsewhere so I can take it out and discard the problem part but I'm kinda pissed that the xspc clear uv tubing
by Sparktite

So I just put the finishing touches in and I think it looks great just wish I had more uv cable combs/clips, I've got some black ones for the vid cards at the moment and then some white(uv) ones on the orange 24pin cables for now. I also still need to fin
by Sparktite

Dipped some under layer parts, reglossified the phanteks panels and ssd mount, gotta re dip the front ports cover and repair the base panel corners
by Sparktite

Got some nice photos of the case as I pieced t back together some more for ideas and references again. Loving the look so far, overcompensating for the lack of white in the case itself for a mostly white themed color scheme by plasti dipping every possibl
by Sparktite

CIMG0615
by JSam76

This rad has been giving me hell with uneven fan mount panels and then all the work trying to clean the logo sticker residue off and even taping off the fans that will still look funky after all the work... Man the 140mm ver was so much easier and came ou
by Sparktite

Work from the other day when trying to redo the top panel sadly couldn't get any good wet coats of the glossifier since my last can was spewing out plasti dip no matter the tip even after trying to take some of the pressure out it just did not wanna work
by Sparktite

Think I stripped the screw or a part on the swiftechs pump mounting piece and it's causing a leak, luckily i already had plans to use that pump elsewhere so I can take it out and discard the problem part but I'm kinda pissed that the xspc clear uv tubing
by Sparktite

image
by Sparktite

Finally some progress almost done with a plastic under panel being dipped, same goes for the USB cover/panel, already even started up workin' on the top case panel, fixin a side panel, painting another rad, and eventually cutting down the edges on the rad
by Sparktite

This rad has been giving me hell with uneven fan mount panels and then all the work trying to clean the logo sticker residue off and even taping off the fans that will still look funky after all the work... Man the 140mm ver was so much easier and came ou
by Sparktite

Testing some lighting for my acrylic water blocks, in short the white lights up too much and I'm already lining the case in white to show off parts and using UV strips for all the UV related things, the UV LEDs here aren't strong enough and show up too pu
by Sparktite

image
by Sparktite

Working on my blaze(uv) orange plasti dipped fan corners to fit my portal themed PC case colors
by Sparktite

Extreme Overclocking - Gigabyte at the Rectron Roadshow August 2009
by Axel Bührmann

And it's finally up and running perfectly.
by Sparktite

Actually tearing it all down and planning to get as much of the move as I can under way I didn't really plan out how I was gonna maintain my main loop so I can't really even drain the thing without having to almost open the whole thing up to get to the ra
by Sparktite

Oh man thank god i as able to go at this with a cutting blade instead of the usual aluminum oxide grinding bit, it'll make cleaning up and repainting a breeze and save me literally hours of work thank god.
by Sparktite

Extreme Overclocking - Gigabyte at the Rectron Roadshow August 2009
by Axel Bührmann

Extreme Overclocking - Gigabyte at the Rectron Roadshow August 2009
by Axel Bührmann

Actually tearing it all down and planning to get as much of the move as I can under way I didn't really plan out how I was gonna maintain my main loop so I can't really even drain the thing without having to almost open the whole thing up to get to the ra
by Sparktite

Ugh I didn't really keep in mind that my whole loop if not both loops are needing to be cleaned pretty much so bored gotta deal with that ontop of the plasti dipping and the whole PC move i was hoping id be at least enjoying a game while i wait for the pl
by Sparktite

So I just put the finishing touches in and I think it looks great just wish I had more uv cable combs/clips, I've got some black ones for the vid cards at the moment and then some white(uv) ones on the orange 24pin cables for now. I also still need to fin
by Sparktite

So I decided it'd be easier if I just reversed the flow of the whole graphics card loop so I got all the fitting on, so got myself the hosing color scheme to do and still gotta take the top back off and figure out exactly where my LEDs have to be placed..
by Sparktite

Can't stand the copper showing when there's no other visible copper. But I've decided to keep the xspc waterblock and back plate so long as I can plasti dip the back white which is being prepped. The swiftech AIO is all ready to go so gonna be taking the
by Sparktite

Hell yeah just snagged myself a free metallic Asus badge for my new pc and I've been saving all mine just incase for this very reason too.
by Sparktite

Trying to fit this fan shroud/grill piece to give the case more white, but it still needs to be shaved down on one side to fit so out comes the dremel. Gonna also be reworking my cpu block look and some of the wire routing and hosing now that a lot of the
by Sparktite

all the paint projects are drying their final coats and then it's time to file the shelf and get back to tidying up all the overspray and peeling on my door panels.
by Sparktite

Actually tearing it all down and planning to get as much of the move as I can under way I didn't really plan out how I was gonna maintain my main loop so I can't really even drain the thing without having to almost open the whole thing up to get to the ra
by Sparktite

Man I forgot how beast this old classy kingpin card looks I can't wait to see it all out completely white...
by Sparktite

Stripped down evolv ATX case for some more touch up plasti dip related work (of course this isn't entirely stripped out for various reasons)
by Sparktite

Showing the pump mounting and screw that got stuck to a spacer with pix before and after using the dip fix kit as well as a photo of the phanteks panel I wanna try drilling a hole into for hiding wires in the case otherwise I'll just remove the piece enti
by Sparktite

Finally some progress almost done with a plastic under panel being dipped, same goes for the USB cover/panel, already even started up workin' on the top case panel, fixin a side panel, painting another rad, and eventually cutting down the edges on the rad
by Sparktite

Stripped down evolv ATX case for some more touch up plasti dip related work (of course this isn't entirely stripped out for various reasons)
by Sparktite

Stripped down evolv ATX case for some more touch up plasti dip related work (of course this isn't entirely stripped out for various reasons)
by Sparktite

Extreme Overclocking - Gigabyte at the Rectron Roadshow August 2009
by Axel Bührmann

The 780ti classy KPE card has now officially had it's water block whitified! Problem is I can't plasti dip the amazing EVGA backplate because of the void warranty sticker but I can at least use this already dipped EK back plate. Hopefully I'll find anothe
by Sparktite

One video card completely assembled and leak checked ready to go after I make sure it's dried up some before arranging my whole setup, one video card in a used EK block that looks funky but no one will notice lol gotta drain that and dry it. All leaks fix
by Sparktite

So I just put the finishing touches in and I think it looks great just wish I had more uv cable combs/clips, I've got some black ones for the vid cards at the moment and then some white(uv) ones on the orange 24pin cables for now. I also still need to fin
by Sparktite

Actually tearing it all down and planning to get as much of the move as I can under way I didn't really plan out how I was gonna maintain my main loop so I can't really even drain the thing without having to almost open the whole thing up to get to the ra
by Sparktite

Can't afford another amazing dazmode uv led strip let alone another one and matching white strips from them as well so i made do with an old cold cathode 2pc with the 2 uv led strips, and an NZXT white sleeves led kit/cable for now. I even need to get ei
by Sparktite

Some quick pics of my test fitting parts n all now that all he Plasti dip work is done as far as I can tell. Now I just need to drill two holes for a specific fan get my lights and hosing better allocated and test run the loops for leaks n for looks befor
by Sparktite

Got some nice photos of the case as I pieced t back together some more for ideas and references again. Loving the look so far, overcompensating for the lack of white in the case itself for a mostly white themed color scheme by plasti dipping every possibl
by Sparktite

Fuck it the thermal pads I used are of such high quality and the online site that I liked shut down so I'm gonna keep it as is and just plasti dip the acetal plates on the xspc copper block rather than ghetto mod together that EVGA reference setup I had.
by Sparktite

Wow didn't think it'd turn out this well so far no leaks and the two pumps running together makes for massive flow rate and I've also included some pics of that beautiful ekoolant mix I pored in a primochill bottle and you can also see the new led back li
by Sparktite

Finished the card ages ago but finally got the pics up with some others of the single stick of ram I dipped blue and made a smoke window for to test two different lighting theories with. Got the other card in nicely customized too and then I'm finally rea
by Sparktite

Finally sanded down what a pain I wanna skip wet sanding/polishing and just try primer then rdy then plasti dip all over, besides the shelf is gonna be covered on both sides so whose gonna see right? Lol I hate doing macro-spec shit
by Sparktite

Finally sanded down what a pain I wanna skip wet sanding/polishing and just try primer then rdy then plasti dip all over, besides the shelf is gonna be covered on both sides so whose gonna see right? Lol I hate doing macro-spec shit
by Sparktite

Finally sanded down what a pain I wanna skip wet sanding/polishing and just try primer then rdy then plasti dip all over, besides the shelf is gonna be covered on both sides so whose gonna see right? Lol I hate doing macro-spec shit
by Sparktite

Trying to fit this fan shroud/grill piece to give the case more white, but it still needs to be shaved down on one side to fit so out comes the dremel. Gonna also be reworking my cpu block look and some of the wire routing and hosing now that a lot of the
by Sparktite

Got some nice photos of the case as I pieced t back together some more for ideas and references again. Loving the look so far, overcompensating for the lack of white in the case itself for a mostly white themed color scheme by plasti dipping every possibl
by Sparktite

Well I only got so far with showing off the shelf as I removed it and was gonn a include photos of the red and fans on it until I realized I needed a spreader or shroud of maybe a mm of two to keep the fan blades from hitting just the tiniest imperfection
by Sparktite