overclocked

Overclocked
by The Master Shake Signal

Overclocked
by northways

GPU Benchmark LuxMark Overclocked
by Dave Dugdale

Showing the pump mounting and screw that got stuck to a spacer with pix before and after using the dip fix kit as well as a photo of the phanteks panel I wanna try drilling a hole into for hiding wires in the case otherwise I'll just remove the piece enti
by Sparktite

nVidia NV35 GPU
by Diego3336

My updated workspace, aka I Finally Got a Third 22" LCD
by creecher94

Almost there... I'll take functional work over perfect work any day so long as it isn't visable when everything is done lol
by Sparktite

Testing some lighting for my acrylic water blocks, in short the white lights up too much and I'm already lining the case in white to show off parts and using UV strips for all the UV related things, the UV LEDs here aren't strong enough and show up too pu
by Sparktite

Overclocked display from Sophia Books at SFU, Vancouver BC
by gruntzooki

Holy crap I managed to find a way to dremel a flat cut into the security bit scuff made for their controller and I used a flathead to then remove the bit. I actually took apart a scuff now I can install all my precious custom parts that won't break down o
by Sparktite

Day 83 - Overclocked
by thewebprincess

Work from the other day when trying to redo the top panel sadly couldn't get any good wet coats of the glossifier since my last can was spewing out plasti dip no matter the tip even after trying to take some of the pressure out it just did not wanna work
by Sparktite

Finally done time for the file and then re plasti dipping :P
by Sparktite

Testing some lighting for my acrylic water blocks, in short the white lights up too much and I'm already lining the case in white to show off parts and using UV strips for all the UV related things, the UV LEDs here aren't strong enough and show up too pu
by Sparktite

(niño pez) Overclocked
by tnarik

Testing some lighting for my acrylic water blocks, in short the white lights up too much and I'm already lining the case in white to show off parts and using UV strips for all the UV related things, the UV LEDs here aren't strong enough and show up too pu
by Sparktite

It just hit me ur supposed to be able to take apart your water blocks to be able to clean them or at least for the manufacturer to do so. That means I can plasti dip the CPU block when I get more plasti dip. I was also inspired by a YouTube video to plast
by Sparktite

Yay :)
by Saad Baig

The new Setup (New rig)
by Saad Baig

eCesys 486 66 system
by blakespot

Color testing the blaze blue on a ram stick cover with a smoke plasti dipped window as the clear windows don't allow the led to glow through properly and seeing if adding more blue in would fit the theme better. Plus the plasti dip blaze colors look aweso
by Sparktite

Finally loading everything into the case now that the fan on top aren't catching anymore... Here's some quick uv color examples still testing out the ram color combos, then a shot of the back cable arrangement and a shot of the PCI-E riser I'm using for m
by Sparktite

Can't stand the copper showing when there's no other visible copper. But I've decided to keep the xspc waterblock and back plate so long as I can plasti dip the back white which is being prepped. The swiftech AIO is all ready to go so gonna be taking the
by Sparktite

eCesys 486 66 close-up
by blakespot

Showing the pump mounting and screw that got stuck to a spacer with pix before and after using the dip fix kit as well as a photo of the phanteks panel I wanna try drilling a hole into for hiding wires in the case otherwise I'll just remove the piece enti
by Sparktite

I realized a but late again that I have to cut some more of the panel off the gonna have to clean and re dip the piece since the fans need to fit under the three tabs in the pic... At least the side panel with the window is almost ready to cure.
by Sparktite

AMD 5x86 133 (o'clocked to 160MHz)
by blakespot

Finally done time for the file and then re plasti dipping :P
by Sparktite

Got some nice photos of the case as I pieced t back together some more for ideas and references again. Loving the look so far, overcompensating for the lack of white in the case itself for a mostly white themed color scheme by plasti dipping every possibl
by Sparktite

Finished the card ages ago but finally got the pics up with some others of the single stick of ram I dipped blue and made a smoke window for to test two different lighting theories with. Got the other card in nicely customized too and then I'm finally rea
by Sparktite

Old Stuff
by jodelli

Elonex PC-5120H/I
by JPC24M

Evolution
by Saad Baig

all the paint projects are drying their final coats and then it's time to file the shelf and get back to tidying up all the overspray and peeling on my door panels.
by Sparktite

Cory Doctorow performing his thoughts
by tangentman

Finally some progress almost done with a plastic under panel being dipped, same goes for the USB cover/panel, already even started up workin' on the top case panel, fixin a side panel, painting another rad, and eventually cutting down the edges on the rad
by Sparktite

Gave it a quick rinse after I went at it some more with the aluminum grinding bit so it wouldn't be as sharp and would look better so here's a few more pics before I start prepping and applying plasti dip again
by Sparktite

Blizzard A1260 with 66MHz 68060 and Blizzard SCSI module
by blakespot

Finally loading everything into the case now that the fan on top aren't catching anymore... Here's some quick uv color examples still testing out the ram color combos, then a shot of the back cable arrangement and a shot of the PCI-E riser I'm using for m
by Sparktite

Well I only got so far with showing off the shelf as I removed it and was gonn a include photos of the red and fans on it until I realized I needed a spreader or shroud of maybe a mm of two to keep the fan blades from hitting just the tiniest imperfection
by Sparktite

Testing some lighting for my acrylic water blocks, in short the white lights up too much and I'm already lining the case in white to show off parts and using UV strips for all the UV related things, the UV LEDs here aren't strong enough and show up too pu
by Sparktite

My Desk
by John "Pathfinder" Lester

Newly built tower PC (Case door open)
by Generic Brand Productions

Scanning old photos, #1: ~2000-10 desk
by pmsyyz

Time to glossify the inside of the last side panel and I've decided to redo the top because of all the uh let's call 'em imperfections. I was hesitant when it came to figuring a way to dip the top without turning the grills white but since I already sorta
by Sparktite

Monorail Doors Abstract
by CL Photographs

Finally loading everything into the case now that the fan on top aren't catching anymore... Here's some quick uv color examples still testing out the ram color combos, then a shot of the back cable arrangement and a shot of the PCI-E riser I'm using for m
by Sparktite

Color testing the blaze blue on a ram stick cover with a smoke plasti dipped window as the clear windows don't allow the led to glow through properly and seeing if adding more blue in would fit the theme better. Plus the plasti dip blaze colors look aweso
by Sparktite

Color testing the blaze blue on a ram stick cover with a smoke plasti dipped window as the clear windows don't allow the led to glow through properly and seeing if adding more blue in would fit the theme better. Plus the plasti dip blaze colors look aweso
by Sparktite

Damn it not again... That's what I get for getting impatient :'(
by Sparktite

Test fitting the shelf into the mounting top for it, it's and unbelievably right fit but I had to do more work and dig around for the perfect screws and even bend the areas where the fan just refused to work with me and stop scripting the shelf it was mou
by Sparktite

Actually tearing it all down and planning to get as much of the move as I can under way I didn't really plan out how I was gonna maintain my main loop so I can't really even drain the thing without having to almost open the whole thing up to get to the ra
by Sparktite

Testing some lighting for my acrylic water blocks, in short the white lights up too much and I'm already lining the case in white to show off parts and using UV strips for all the UV related things, the UV LEDs here aren't strong enough and show up too pu
by Sparktite

Inside PC
by mcaretaker

Piecing together the dried cured panels and getting a better idea of how the case is turning out. Decided to take off all the old plasti dip on my side panel without a window and rather than mess around with the thinner mix over and over. Came out nicely
by Sparktite

Finally some progress almost done with a plastic under panel being dipped, same goes for the USB cover/panel, already even started up workin' on the top case panel, fixin a side panel, painting another rad, and eventually cutting down the edges on the rad
by Sparktite

Redid my hoses for better color scheme and adding a proper method to fill and drain the loop from the bottom pump/res so I can flush leak test and maintain the graphics card loop easier and better.
by Sparktite

Testing pump inlet tubing mod length and seeing if the sponge is even necessary with the mod....
by Sparktite

Testing some lighting for my acrylic water blocks, in short the white lights up too much and I'm already lining the case in white to show off parts and using UV strips for all the UV related things, the UV LEDs here aren't strong enough and show up too pu
by Sparktite

DSCF3058
by Rick Duff - Bremertonian