portaltheme

Got some nice photos of the case as I pieced t back together some more for ideas and references again. Loving the look so far, overcompensating for the lack of white in the case itself for a mostly white themed color scheme by plasti dipping every possibl
by Sparktite

Some quick pics of my test fitting parts n all now that all he Plasti dip work is done as far as I can tell. Now I just need to drill two holes for a specific fan get my lights and hosing better allocated and test run the loops for leaks n for looks befor
by Sparktite

Got some nice photos of the case as I pieced t back together some more for ideas and references again. Loving the look so far, overcompensating for the lack of white in the case itself for a mostly white themed color scheme by plasti dipping every possibl
by Sparktite

Wow this photo actually makes all the cleaning up I gotta do look like nothing and that doesn't even include all the stuff I still need to actually do, use, sort, and make/put together...
by Sparktite

Work from the other day when trying to redo the top panel sadly couldn't get any good wet coats of the glossifier since my last can was spewing out plasti dip no matter the tip even after trying to take some of the pressure out it just did not wanna work
by Sparktite

Gonna need to look into this clip a bit more since I'm ghetto rigging a stolen swiftech AIO pump and not using an mcp35x pump that I bought on its own I have some issues i expected to run into. The retention clip as I originally read about is used as well
by Sparktite

Ugh I didn't really keep in mind that my whole loop if not both loops are needing to be cleaned pretty much so bored gotta deal with that ontop of the plasti dipping and the whole PC move i was hoping id be at least enjoying a game while i wait for the pl
by Sparktite

Work from the other day when trying to redo the top panel sadly couldn't get any good wet coats of the glossifier since my last can was spewing out plasti dip no matter the tip even after trying to take some of the pressure out it just did not wanna work
by Sparktite

Finally some progress almost done with a plastic under panel being dipped, same goes for the USB cover/panel, already even started up workin' on the top case panel, fixin a side panel, painting another rad, and eventually cutting down the edges on the rad
by Sparktite

Stupid plasti dip adhered to one of the surfaces I use hat had dried plasti dip overspray on it so I've had to fix the dip that was pulled off the panel and it doesn't look bad without the gloss that is. Decided I'm gonna be re dipping my top panel and ma
by Sparktite

Work from the other day when trying to redo the top panel sadly couldn't get any good wet coats of the glossifier since my last can was spewing out plasti dip no matter the tip even after trying to take some of the pressure out it just did not wanna work
by Sparktite

The 780ti classy KPE card has now officially had it's water block whitified! Problem is I can't plasti dip the amazing EVGA backplate because of the void warranty sticker but I can at least use this already dipped EK back plate. Hopefully I'll find anothe
by Sparktite

Managed to actually fit the screws and align them so the res/pump can be securely fastened to something but sadly it causes the res to be in front of one of my rads which is something i always hate seeing done on other peoples PC builds. Also realized tha
by Sparktite

Sizing up the heatsinks and their respective beats leaders then I gotta figure out where everything should mount to and from. After that it's gonna be a lotta hoses and look just silly compared to a real clean non generic/sorta ghetto mobo water cooling s
by Sparktite

Gave it a quick rinse after I went at it some more with the aluminum grinding bit so it wouldn't be as sharp and would look better so here's a few more pics before I start prepping and applying plasti dip again
by Sparktite

Finished the card ages ago but finally got the pics up with some others of the single stick of ram I dipped blue and made a smoke window for to test two different lighting theories with. Got the other card in nicely customized too and then I'm finally rea
by Sparktite

Ugh I didn't really keep in mind that my whole loop if not both loops are needing to be cleaned pretty much so bored gotta deal with that ontop of the plasti dipping and the whole PC move i was hoping id be at least enjoying a game while i wait for the pl
by Sparktite

Damn it not again... That's what I get for getting impatient :'(
by Sparktite

The 780ti classy KPE card has now officially had it's water block whitified! Problem is I can't plasti dip the amazing EVGA backplate because of the void warranty sticker but I can at least use this already dipped EK back plate. Hopefully I'll find anothe
by Sparktite

Got some nice photos of the case as I pieced t back together some more for ideas and references again. Loving the look so far, overcompensating for the lack of white in the case itself for a mostly white themed color scheme by plasti dipping every possibl
by Sparktite

Work from the other day when trying to redo the top panel sadly couldn't get any good wet coats of the glossifier since my last can was spewing out plasti dip no matter the tip even after trying to take some of the pressure out it just did not wanna work
by Sparktite

Work from the other day when trying to redo the top panel sadly couldn't get any good wet coats of the glossifier since my last can was spewing out plasti dip no matter the tip even after trying to take some of the pressure out it just did not wanna work
by Sparktite

So I decided it'd be easier if I just reversed the flow of the whole graphics card loop so I got all the fitting on, so got myself the hosing color scheme to do and still gotta take the top back off and figure out exactly where my LEDs have to be placed..
by Sparktite

Looking fairly good, considering I'm doing what some would consider more than just unconventional but a rear rad intake with a front rad intake to help pressure and flow through the top exhaust. Especially if you consider the highest temps put out by my P
by Sparktite

Finally loading everything into the case now that the fan on top aren't catching anymore... Here's some quick uv color examples still testing out the ram color combos, then a shot of the back cable arrangement and a shot of the PCI-E riser I'm using for m
by Sparktite

Finally got to the leak testing gonna need to remove the useless foam filter in the res since I'm using a hose which is acting like a down stem to prevent any cycloning in the res from how it normally runs. Then if it's all good to go I can prep flush and
by Sparktite

So I just put the finishing touches in and I think it looks great just wish I had more uv cable combs/clips, I've got some black ones for the vid cards at the moment and then some white(uv) ones on the orange 24pin cables for now. I also still need to fin
by Sparktite

I think these self made grills are gonna work out better than the originals, so glad i had the perfect spare 330m fan grill to make these with. (Original grill/filter farthest to the left in the side by sides pics for reference.
by Sparktite

Gave it a quick rinse after I went at it some more with the aluminum grinding bit so it wouldn't be as sharp and would look better so here's a few more pics before I start prepping and applying plasti dip again
by Sparktite

Finished the card ages ago but finally got the pics up with some others of the single stick of ram I dipped blue and made a smoke window for to test two different lighting theories with. Got the other card in nicely customized too and then I'm finally rea
by Sparktite

Thought I might attempt installing spare water cooling mobo N & S bridge heatsinks while I wait for plasti dip and such rather than play more games lol
by Sparktite

So I just put the finishing touches in and I think it looks great just wish I had more uv cable combs/clips, I've got some black ones for the vid cards at the moment and then some white(uv) ones on the orange 24pin cables for now. I also still need to fin
by Sparktite

It just hit me ur supposed to be able to take apart your water blocks to be able to clean them or at least for the manufacturer to do so. That means I can plasti dip the CPU block when I get more plasti dip. I was also inspired by a YouTube video to plast
by Sparktite

Finally loading everything into the case now that the fan on top aren't catching anymore... Here's some quick uv color examples still testing out the ram color combos, then a shot of the back cable arrangement and a shot of the PCI-E riser I'm using for m
by Sparktite

And it's finally up and running perfectly.
by Sparktite

I kinda wish I dipped the xspc water block panels cuz it just looks so much sturdier cleaner and it has more acrylic for the theme and LEDs in my case...
by Sparktite

Pick with visible markings for my cuts and what it looks like from the inside
by Sparktite

Test fitting the shelf into the mounting top for it, it's and unbelievably right fit but I had to do more work and dig around for the perfect screws and even bend the areas where the fan just refused to work with me and stop scripting the shelf it was mou
by Sparktite

Testing some lighting for my acrylic water blocks, in short the white lights up too much and I'm already lining the case in white to show off parts and using UV strips for all the UV related things, the UV LEDs here aren't strong enough and show up too pu
by Sparktite

Well I only got so far with showing off the shelf as I removed it and was gonn a include photos of the red and fans on it until I realized I needed a spreader or shroud of maybe a mm of two to keep the fan blades from hitting just the tiniest imperfection
by Sparktite

My plasti dip work station that I have to keep tearing up and redoing to keep all the work I do clean and it's still hard as hell to pull off...
by Sparktite

Thought I might attempt installing spare water cooling mobo N & S bridge heatsinks while I wait for plasti dip and such rather than play more games lol
by Sparktite

Gave it a quick rinse after I went at it some more with the aluminum grinding bit so it wouldn't be as sharp and would look better so here's a few more pics before I start prepping and applying plasti dip again
by Sparktite

So I decided it'd be easier if I just reversed the flow of the whole graphics card loop so I got all the fitting on, so got myself the hosing color scheme to do and still gotta take the top back off and figure out exactly where my LEDs have to be placed..
by Sparktite

Test fitting the shelf into the mounting top for it, it's and unbelievably right fit but I had to do more work and dig around for the perfect screws and even bend the areas where the fan just refused to work with me and stop scripting the shelf it was mou
by Sparktite

Testing some lighting for my acrylic water blocks, in short the white lights up too much and I'm already lining the case in white to show off parts and using UV strips for all the UV related things, the UV LEDs here aren't strong enough and show up too pu
by Sparktite

Test fitting the shelf into the mounting top for it, it's and unbelievably right fit but I had to do more work and dig around for the perfect screws and even bend the areas where the fan just refused to work with me and stop scripting the shelf it was mou
by Sparktite

Testing some lighting for my acrylic water blocks, in short the white lights up too much and I'm already lining the case in white to show off parts and using UV strips for all the UV related things, the UV LEDs here aren't strong enough and show up too pu
by Sparktite

Test fitting the shelf into the mounting top for it, it's and unbelievably right fit but I had to do more work and dig around for the perfect screws and even bend the areas where the fan just refused to work with me and stop scripting the shelf it was mou
by Sparktite

She's completely stripped time to drain this sucker then I can dip my swiftech h240x
by Sparktite

And it's finally up and running perfectly.
by Sparktite

Finally finished the top mounted swiftech AIO, got more pics and more work to do...
by Sparktite

Well I only got so far with showing off the shelf as I removed it and was gonn a include photos of the red and fans on it until I realized I needed a spreader or shroud of maybe a mm of two to keep the fan blades from hitting just the tiniest imperfection
by Sparktite

Man I forgot how beast this old classy kingpin card looks I can't wait to see it all out completely white...
by Sparktite

And it's finally up and running perfectly.
by Sparktite

Man I forgot how beast this old classy kingpin card looks I can't wait to see it all out completely white...
by Sparktite

Test fitting the shelf into the mounting top for it, it's and unbelievably right fit but I had to do more work and dig around for the perfect screws and even bend the areas where the fan just refused to work with me and stop scripting the shelf it was mou
by Sparktite

Test fitting the shelf into the mounting top for it, it's and unbelievably right fit but I had to do more work and dig around for the perfect screws and even bend the areas where the fan just refused to work with me and stop scripting the shelf it was mou
by Sparktite

Well I only got so far with showing off the shelf as I removed it and was gonn a include photos of the red and fans on it until I realized I needed a spreader or shroud of maybe a mm of two to keep the fan blades from hitting just the tiniest imperfection
by Sparktite

Test fitting the shelf into the mounting top for it, it's and unbelievably right fit but I had to do more work and dig around for the perfect screws and even bend the areas where the fan just refused to work with me and stop scripting the shelf it was mou
by Sparktite