Basic guitar toolkit : 無料・フリー素材/写真
Basic guitar toolkit / TT Zop
| ライセンス | クリエイティブ・コモンズ 表示-継承 2.1 |
|---|---|
| 説明 | Tools used to perform this retrofit:The Gibson Les Paul Handbook by Paul Balmer ($16.50 from Amazon)Dremel™ rotary tool (grinding, fret polishing)Screwdriver with hex head socket, multiple tips stored insideHex bit for the above, to use socketsDeep 1/4" socket, for jack and pot nutsNarrow walled 5/16" socket, for truss rod adjustmentSmall Phillips and Standard tip jeweler's screwdriversWire snips and needle-nosed pliersMultimeter, digital auto range ($13 on eBay)Pair of alligator clip leadsMicrometer, with digital readout ($12 on eBay)X-Acto™ knifeSmall pistol-grip battery-powered drill with hex head socketTurbo Tune string winder, pulls apart for drill use ($8 from Stew-Mac)Helping Hands clips w/ lighted magnifier and soldering station25 Watt soldering iron (pen type), chisel tipDesoldering bulb, solder wick for cleanupSolder, 60/40 resin coreWire strippersBright halogen desk lampAcrylic ruler with metal straightedge to check fret level (not shown)Also essential: Besides a few cleaning/polishing products, three large thick bath towels to lay flat or roll up, to both support and protect the guitar.Don't let a fear of soldering prevent you from doing your own guitar work. If you can play guitar, you already have more than enough dexterity to do it. Basic instructions and how-to videos are all over the Web; spend five minutes to learn and five minutes to practice, and you'll have it down well enough. Just remember:1. Heat the part, not the solder; apply solder to the part, not the tip.2. Don't get the parts too hot. That can melt insulation or fry a capacitor (I've 'cooked' a few pots and ruined them from excessive heating after lots of pickup swapping). Using hemostats or aluminum heat sink clips (even larger alligator clips) can keep things from overheating.... |
| 撮影日 | 2010-03-01 04:53:29 |
| 撮影者 | TT Zop |
| 撮影地 | |
| カメラ | DSC-H3 , SONY |
| 露出 | 0.025 sec (1/40) |
| 開放F値 | f/3.5 |